In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit.
KEY FEATURES:
- Can be fit to the right-hand side (only on the right-hand side) of compatible handlebars or on the down tube of compatible frames
- 2 connectors on the rear side - one to connect to the power unit (gray), and one to connect to the Ergopower controls (orange)
SPECIFICATIONS:
FD/Shifter Compatibility: EPS
Optional: EPS Internal Handlebar Cable
- Riding Settings
Electronic
The client can adjust the reference position of the rear derailleur and/or derailleur using the adjustment procedure known as Riding Setting.
The adjustment of the rear derailleur is designed especially in case you change the wheel for one with a set of sprockets that are positioned differently with respect to the drop out.
It is possible to start the procedure for either the rear derailleur or the derailleur from any chainring.
Every time either keys 2 or 3 is pressed, the system performs a set displacement of 0.25 mm if you act on the rear derailleur, and approximately 0.1 mm if you act on the derailleur.
When you have completed the adjustment phase, the system will correct the established positions of all chainrings based on the new settings.
- On Board Diagnostic
Electronic
The EPS system is capable of automatically detecting a whole range of malfunctions.
If a malfunction is detected, the EPS system turns on an RGB led located on the power unit.
Depending on the area where the malfunction has been detected the led takes on different colours, as per the table below.
Being that in some situations the cause of the malfunction making the led light up on the power unit may be temporary, a number of operations are recommended to the end user depending on the colour of the light that appears on the PowerUnit.
We love this Campagnolo DTI EPS V3 Interface.
Buy a Campagnolo DTI EPS V3 Interface from Texas Cyclesport, A Better Bike Ride Begins Here.
